Tips on connecting clients to the router and drone:

-The IP address of the drone is 192.168.1.1

-To connect your laptop to the router, just select the SSID of your router and then renew your IP address (dhcp). You can also set the IP address on your laptop manually:
IP: 192.168.1.10
Netmask: 255.255.255.0
Gateway: 192.168.1.254

-To connect your iphone to the drone, select the SSID of your router and manually specify the IP address. You could use DHCP, but the drone iphone app needs a specific IP address range else the application hangs.
IP: 192.168.1.4
Netmast: 255.255.255.0
Gateway: 192.168.1.254

-Make sure your Make Controller has DHCP enabled. You can do this by sending the following command in MC Helper:
/network/dhcp 1

This only needs to be done once.